AMG6 AlMg6 5A06 aluminum alloy plate sheet is Al-Mg rust-proof aluminium, 5A06 aluminium sheet has high strength and corrosion stability, good plasticity under annealing and extrusion conditions, gas tightness and plasticity of welding seam with argon arc welding are still acceptable, and strength of welding joint with gas welding and spot welding is 90-95% of matrix strength, and good machinability.
Application:
It has good strength, corrosion resistance and machinability in non-heat-treated alloys. The surface is beautiful after anodizing treatment. The arc welding performance is good. The main alloying element in AMG6 AlMg6 5A06 alloy is magnesium, which has good corrosion resistance, weldability and medium strength. Due to its excellent corrosion resistance, AMG6 AlMg6 5A06 aluminum alloy plate sheet is widely used in marine applications such as ships, automobiles, aircraft welding parts, Metro Light rails. Pressure containers (such as liquid tankers, refrigerated trucks, refrigerated containers), refrigeration devices, TV towers, drilling equipment, transportation equipment, missile parts, armor and so on, which require strict fire protection are required. (2) AMG6 AlMg6 5A06 aluminum alloy plate shee belongs to Al-Mg alloys, which are widely used, especially in the construction industry. It is the most promising alloy. It has good corrosion resistance, good weldability, good cold workability and medium strength. The main alloying element of 5083 is magnesium, which has good formability, corrosion resistance, weldability and medium strength. It is used to make sheet metal parts of aircraft fuel tank, oil pipe, traffic vehicle and ship, instruments, street lamp brackets and rivets, hardware products, electrical shell, etc. (3) Al-Mn alloy is the most widely used anti-rust aluminium alloy, which has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in Semi-cold hardening, low plasticity in cold hardening, good corrosion resistance, good weldability, poor machinability and polishing. Uses are mainly used for low-load parts which require high plasticity and good weldability and work in liquid or gas media, such as oil tank, gasoline or lubricant conduit, various liquid containers and other low-load parts made by deep drawing: wire rods are used as rivets.
